* /ProdInfo/Gallery/1HANU_HeaderImage1_New111.jpg?á
* /ProdInfo/Gallery/1sanding-block12.jpg
Surface Preparation:
The covering job can only be as good as the finish of the surface it's applied over. In order for the covering to properly adhere to a surface, the surface must first be smooth and clean. Sand the model using a sanding block and progressively finer sandpaper, with the final sanding being done with 320 grit paper. Vacuum away all of the dust, as specks of dust under the covering will leave unsightly bumps. Fill gaps and dents with a high-quality filler. If using light-colored UltraCote?« (such as white or yellow), use a tan-colored filler that matches the wood color to prevent the filler from showing through.
* Pro Tip - Some professional builders ?ôraise the grain?ö then sand a second time with 320 or 400 grit paper for the ultimate finish. After the model is sanded, use a damp cloth to wipe down the model. Some mo
